水蒸气对煤焦油模化物裂解行为及析碳的影响

采用机械化学法制备Ni-Ce/Al₂O₃催化剂，在固定床反应器中考察了水蒸气气氛对煤焦油模型化合物甲苯＋芘催化裂解行为的影响。根据产物生成规律提出了芘向萘转化的裂解机理，并以D₂O对其进行了验证。通过XRD、TG-DTG和Raman等表征了析碳的类型与结构特征。结果表明：相较于纯氮气气氛，水的加入可明显提升重质组分芘的裂解率，且随水碳比（S/C）增加呈先增加后降低的趋势，在S/C=0.15时达到最大值98.93%，比S/C=0时增加32.09%。析碳率随S/C比增加一直呈下降趋势，由S/C=0时的10.04%降至S/C=0.26时的5.39%。析碳分析结果表明，S/C=0时，生成的积炭类型主要是β型碳及γ型碳，水蒸气存在时，活性较高的α型碳含量增加，说明水蒸气的持续消碳作用抑制了C_α向C_β与C_γ方向转化。     

Combating Biofilm Associated Infection In Vivo: Integration of Quorum Sensing Inhibition and Photodynamic Treatment based on Multidrug Delivered Hollow Carbon Nitride Sphere

Recently, quorum sensing (QS) inhibitors (QSIs) have been combined with antibiotics to enhance antibiofilm efficacy in vitro and in vivo. However, targeting QS signals alone is not enough to prevent bacterial infections. Drug resistance and recurrence of biofilms makes it difficult to eradicate. Herein, photodynamic therapy (PDT) is selected to unite QSIs and antibiotics. A synergistically antibiofilm system, which combines QSIs, antibiotics, and PDT based on hollow carbon nitride spheres (HCNSs) is envisaged. First, HCNS provides the multidrug delivering ability, enabling QSIs and antibiotics to be released in sequence. Subsequently, multistage releases sensitize bacteria effectively, potentiating the chemotherapeutic effects of the antibiotics. Finally, the integration of QSIs and PDT not only minimizes the possibility of drug resistance, but also overcomes the problem of limited mass and extension of PDT. Even after 48 h of incubation, the bacterial biofilm is obviously inhibited. And its biofilm disperse efficiency exceeds 48% (compared with QSI‐potentiated chemotherapy group) and 40% (compared with PDT group). Besides, the inhibition of the QS system influences phenotypes related to virulence factor production and surface hydrophobicity, which weaken biofilm invasion and formation. Eventually, this system is applied to disperse bacterial biofilm in vivo. Overall, PDT and QS modulation are devoted to eradicate drug resistance and recurrence of the biofilm.     

Molybdenum Dioxide in Carbon Nanoreactors as a Catalytic Nanosponge for the Efficient Desulfurization of Liquid Fuels

The principle of a “catalytic nanosponge” that combines the catalysis of organosulfur oxidation and sequestration of the products from reaction mixtures is demonstrated. Group VI metal oxide nanoparticles (CrO_x, MoO_x, WO_x) are embedded within hollow graphitized carbon nanofibers (GNFs), which act as nanoscale reaction vessels for oxidation reactions used in the decontamination of fuel. When immersed in a model liquid alkane fuel contaminated with organosulfur compounds (benzothiophene, dibenzothiophene, dimethyldibenzothiophene), it is found that MoO₂@GNF nanoreactors, comprising 30 nm molybdenum dioxide nanoparticles grown within the channel of GNFs, show superior abilities toward oxidative desulfurization (ODS), affording over 98% sulfur removal at only 5.9 mol% catalyst loading. The role of the carbon nanoreactor in MoO₂@GNF is to enhance the activity and stability of catalytic centers over at least 5 cycles. Surprisingly, the nanotube cavity can selectively absorb and remove the ODS products (sulfoxides and sulfones) from several model fuel systems. This effect is related to an adsorptive desulfurization (ADS) mechanism, which in combination with ODS within the same material, yields a “catalytic nanosponge” MoO₂@GNF. This innovative ODS and ADS synergistic functionality negates the need for a solvent extraction step in fuel desulfurization and produces ultralow sulfur fuel.     

Pressure transient analysis for asymmetrically fractured wells in dual-permeability organic compound reservoir of hydrogen and carbon

In this paper, a comprehensive semi-analytical model was presented to investigate pressure transient behavior for asymmetrically fractured wells in organic compound reservoir of hydrogen and carbon with dual-permeability behavior. Stehfest inversion algorithm can be used to transform it back into time domain to obtain pressure solution. The presented solution was validated well with numerical solutions. Flow characteristics for asymmetrically fractured wells in dual-permeability organic compound reservoir of hydrogen and carbon were divided into five regime. The effects of some important parameters on dimensionless pressure and its derivative curves were analyzed in details, including inter-porosity flow coefficient from matrix to natural fractures λ, storage coefficient ω, fracture asymmetry factor θ and permeability ratio κ. The presented model can be used to predict production performance and do well test analysis in the development of dual-permeability organic compound reservoir of hydrogen and carbon.     

Conductive and flexible multi-walled carbon nanotube/polydimethylsiloxane composites made with naphthalene/toluene mixture

Conventional conductive materials face challenges when utilizing them for flexible and wearable electronics and soft robotics. Carbon nanotube/polydimethylsiloxane (CNT/PDMS) composites are a promising alternative to the conventional hard conductors because they are light and can realize large deformation. To date, well dispersion of CNTs into PDMS to increase conductivity while maintaining flexibility remains challenging. We aimed at developing highly electrically conductive and flexible multi-walled carbon nanotube/PDMS (MWCNT/PDMS) composites. To this end, we proposed a method to enhance the dispersion of MWCNTs into PDMS using naphthalene and toluene. Our results showed that the addition of naphthalene and toluene into the composites improved dispersion of the MWCNTs and increased the direct current (DC) electrical conductivity. We also found that the morphology of primary aggregates of the MWCNTs influenced the DC electrical conductivity of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48167.     

Association of size‐fractionated indoor particulate matter and black carbon with heart rate variability in healthy elderly women in Beijing

Associations between size‐fractionated indoor particulate matter (PM) and black carbon (BC) and heart rate variability (HRV) and heart rate (HR) in elderly women remain unclear. Twenty‐nine healthy elderly women were measured for 24‐hour HRV/HR indices. Real‐time size‐fractionated indoor PM and BC were monitored on the same day and on the preceding day. Mixed‐effects models were applied to investigate the associations between pollutants and HRV/HR indices. Increases in size‐fractionated indoor PM were significantly associated with declines in power in the high‐frequency band (HF), power in the low‐frequency band (LF), and standard deviation of all NN intervals (SDNN). The largest decline in HF was 19% at 5‐minute moving average for an interquartile range (IQR) increase (24 μg/m³) in PM_0.5. The results showed that smaller particles could lead to greater reductions in HRV indices. The reported associations were modified by body mass index (BMI): Declines in HF at 5‐minute average for an IQR increase in PM_0.5 were 34.5% and 1.0% for overweight (BMI ≥25 kg/m²) and normal‐weight (BMI <25 kg/m²) participants, respectively. Moreover, negative associations between BC and HRV indices were found to be significant in overweight participants. Increases in size‐fractionated indoor PM and BC were associated with compromised cardiac autonomic function in healthy elderly women, especially overweight ones.     

不同掺杂设计对类金刚石涂层海水环境摩擦学性能的影响

采用UDP650型闭合场非平衡磁控溅射系统在硅片及316不锈钢基底表面制备了不同掺杂设计的类金刚石涂层(DLC、Cr/DLC和WC/DLC),通过SEM、Raman、硬度仪和划痕仪研究了涂层的结构及力学性能,利用多功能摩擦试验机考察了涂层在大气及海水环境下的摩擦学性能。结果表明,Cr或WC掺杂能显著促进DLC涂层的石墨化,同时提高涂层的结合力及韧性。在摩擦磨损试验中,由于海水的润滑作用,3种涂层在海水环境下的摩擦因数及磨损率均低于大气环境。同时,WC/DLC在3种涂层中表现出最佳的摩擦学性能,这取决于其高的石墨化程度,良好的结合力及优异的韧性。